The advantage of an electric window regulator is undeniable compared to manual window regulators. Nevertheless, it has the defect of being much more complicated in terms of repairs. Also, it is not necessarily easy to identify precisely the nature of the problem. In this article, we will see how to repair the electric window regulator of a Suzuki Vitara . But before seeing the procedure to follow, you must be sure to understand where the failure comes from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can often work. Whether it concerns a false contact, or just a lack of oiling. Now that you've identified the source of the problem, let's get to the heart of the matter.change-window-lift-Suzuki-Vitara

Replacing a window regulator from Suzuki Vitara: how to do it

Changing a window regulator is quite tedious. Depending on your experience in the field, count approximately two o'clock to make sure you don't get caught up in time. Whether it is on a Suzuki Vitara or on another car, this operation is for experienced DIY enthusiasts. So let's look at what to do, step by step. We advise you to take photos at different times to help you install the new window regulator.

Removing a window regulator on a Suzuki Vitara

  • Remove the entire door trim. From the handle to the mirror cover. This should be done with enough caution using a flat screwdriver. It will be necessary to ensure access to the window regulator at any point without being disturbed. This step is the longest to execute.
  • Remove the window regulator seals from your Suzuki Vitara. Again, it's wiser to do it delicately.
  • Now that you have accessed the window regulator, disconnect the connectors. You can then remove the motor from the window regulator if it is ever stuck.
  • Release all the fasteners that hold the window, then release the window. It is sometimes preferable to place the window halfway up to carry out this manipulation. Of course you will have to be extremely careful when handling the glass. It is advisable to place it on a sufficiently thick sheet.
  • Remove the window regulator entirely. It is wiser to remember your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held by screws or rivets, so you have to remove them.

The installation of an electric window regulator of a Suzuki Vitara

  • Present the new window regulator. Make sure that its position is identical to the previous window regulator. You should definitely use the bindings you have set aside.
  • Reposition the glass as you removed it. Sometimes it will be necessary to move it slightly so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals that you have carefully removed.
  • Replace the entire door trim.

That's it, you now have a new and functional window regulator . So you can turn on your car and test it.