The advantage of an electric window regulator is undeniable compared to manual window regulators. However, it has the drawback of being much more complicated in terms of repairs. Also, it is not always easy to identify precisely the nature of the failure. Here we will see how to change the electric window of a Toyota 1000 . But before you start, you need to be sure you know where the problem is coming from. Indeed, it is regularly unnecessary to change the entire window regulator, a simple repair can sometimes work. Whether it concerns an electrical short circuit, or quite simply a lack of lubrication. Now that you are sure what is causing the malfunction, let's get back to our topic.window-regulator-Toyota-1000

Toyota 1000 window regulator replacement: how to do it

Changing a window regulator is rather tedious. Depending on your expertise in the field, plan approximately three hours in order to be sure that you have the necessary time. Whether on a Toyota 1000 or on another car, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, point by point. We recommend that you take pictures at different times to help you fit the new window regulator.

Removing a window regulator on a Toyota 1000

  • Remove the entire door trim. From mirror cover to handle. This manipulation should be done rather delicately using a flat screwdriver. Make sure to access the window regulator at all points without being disturbed. This manipulation is the longest to perform.
  • Remove the window regulator gaskets from your Toyota 1000. Again, it is essential to do it delicately.
  • Now that you have access to the window regulator, disconnect the connectors. You will then have to release the window lifter motor if it is ever blocked.
  • Remove all the clips that hold the glass in place, then remove the glass. It is regularly better to place the window halfway up to be able to perform this manipulation. Of course, you will have to be very careful when moving the window. It is preferable to place it on a rather thick sheet.
  • Disassemble the window regulator completely. It is essential to remember your location. You can take a picture of it if it can help you attach the new window regulator. The window regulator is regularly held by screws or rivets, so you must remove them.

The installation of an electric window of a Toyota 1000

  • Position the new window regulator. Make sure that its location is similar to the previous window regulator. You probably need to use the clips you removed.
  • Replace the glass just as you took it out. It will be regularly necessary to move it a little so that it fits properly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Replace all of the door trim.

It's good, you now have a new and working window regulator . You will need to turn on your car and test it.