The interest of an electric window regulator is consequent in comparison with manual mechanisms. However, it has the drawback of being much more restrictive in terms of repairs. In addition, it is not necessarily easy to pinpoint the source of the problem. With this article we will find out how to repair the electric window of a Toyota Auris 2 . But before seeing what to do next, you have to be sure you know where the problem originated from. Indeed, it is from time to time unnecessary to replace the entire window regulator, a simple small repair can often work. Whether it's a false contact, or simply a lack of oiling. Now that you've identified the cause of the malfunction, let's get back to our topic.
Toyota Auris 2 window regulator replacement: how to do it
Changing a window regulator is quite long. Depending on your expertise on the subject, plan approximately three hours to make sure you have the necessary time. Whether for a Toyota Auris 2 or on another vehicle, this operation is for experienced handymen. So let's take a look at how to do it, step by step. It is advisable to take pictures at several stages in order to help you reassemble the new window regulator.
Removing a window regulator on a Toyota Auris 2
- Remove the entire door trim. From the handle to the retro cover. This operation should be done quite delicately using a flat screwdriver. You will have to make sure you can access the window regulator at all points without being disturbed. This step is the longest to perform.
- Remove the window regulator gaskets from your Toyota Auris 2. Once again, it is important to do this with caution.
- Now that you have accessed the window regulator, remove the connectors. You can then release the window regulator motor when it is blocked.
- Take out all the fasteners that hold the window in place, then release the window. From time to time it is preferable to place the window halfway up to be able to carry out this operation. Obviously you have to be very careful when handling the glass. It is advisable to place it on a sufficiently thick sheet.
- Remove the window regulator completely. It is important to remember your position well. You can take a picture of it if it helps you fit the new window regulator. The window regulator is from time to time held in place by screws or rivets, it will therefore be necessary to remove them.
The installation of an electric window of a Toyota Auris 2
- Fit the new window regulator. Make sure that its location is identical to the previous window regulator. You will probably have to use the fixings that you removed.
- Reposition the glass as you removed it. From time to time it will be necessary to rotate it a little so that it fits properly in its guide.
- Connect the connectors.
- Fit the seals you removed.
- Replace the entire door trim.
That's it, you now have a new and functional window regulator . You can therefore switch on the ignition and test it.