The advantage of an electric window regulator is enormous compared to manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to identify precisely the source of the problem. Here we will see how to change the electric window regulator of a Toyota Avensis 2 . But before seeing the procedure to follow, you must be certain to understand where the failure came from. Let's be clear, it is from time to time unnecessary to change the entire window regulator, a simple repair will often suffice. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you've identified the source of the concern, let's get back to our topic.change-window-regulator-Toyota-Avensis-2

Toyota Avensis 2 window regulator replacement: how to do it

The replacement of a window regulator is quite long. Depending on your experience in the field, count approximately two o'clock to make sure you don't get caught up in time. Whether on a Toyota Avensis 2 or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's take a look at what to do, step by step. It is advisable to take photos at different times to help you reassemble the new window regulator.

Removing a window regulator on a Toyota Avensis 2

  • Remove the entire door trim. From the mirror cover to the handle. This should be done with enough caution using a flat screwdriver. You will have to make sure to access the window regulator at any point without being embarrassed. This manipulation is the longest to perform.
  • Remove the window regulator seals from your Toyota Avensis 2. Again, it is essential to do it gently.
  • Now that you have access to the window regulator, disconnect the connectors. You will then have to release the window lifter motor if it is ever blocked.
  • Remove all the fasteners that hold the glass, then release it. It is occasionally advisable to position the window halfway up to carry out this manipulation. Of course you will have to be very careful when moving the glass. It is best to place it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is essential to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held in place by screws or rivets, so you must remove them.

The installation of an electric window regulator of a Toyota Avensis 2

  • Position the new window regulator. Make sure that its position is identical to the previous window regulator. You probably need to use the fasteners you have set aside.
  • Replace the glass in the same way as you removed it. It will be necessary from time to time to rotate it a little so that it fits properly in its guide.
  • Reconnect the connectors.
  • Replace the seals that you have carefully removed.
  • Replace the entire door trim.

That's it, you now have a new and functional window regulator . You will have to put the ignition on and test it.