The interest of an electric window regulator is significant compared to manual systems. On the other hand, it has the drawback of being much more restrictive in terms of repairs. Also, it is not necessarily easy to determine precisely the cause of the problem. Here we will see how to change the electric window regulator of a Toyota Avensis 3 . But before you start, you need to be sure you know where the problem is coming from. Indeed, it is regularly unnecessary to replace the entire window regulator, a simple small repair can sometimes be sufficient. Whether it concerns an electrical short circuit, or only a lack of oiling. Now that you've identified the source of the concern, let's get back to our topic.change-window-regulator-Toyota-Avensis-3

Toyota Avensis 3 window regulator replacement: how to do it

Replacing a window regulator is rather time-consuming. Depending on your expertise in the field, plan approximately two o'clock to make sure you have the necessary time. Whether on a Toyota Avensis 3 or on another vehicle, this operation is for experienced handymen. So let's look at what to do, step by step. We recommend that you take pictures in several steps to help you fit the new window regulator.

Removing a window regulator on a Toyota Avensis 3

  • Disassemble the entire door trim. From mirror cover to handle. This operation should be done rather delicately using a flat screwdriver. It will be necessary to make sure to have access to the window regulator at all points without being hampered. This step is quite long to perform.
  • Remove the window regulator seals from your Toyota Avensis 3. Once again, it is essential to do this carefully.
  • Now that you have access to the window regulator, disconnect the connectors. You will then have to disengage the window lifter motor if it is ever stuck.
  • Remove all the clips that hold the glass, then release the glass. It is regularly preferable to place the window halfway up to carry out this operation. Of course you will have to be extremely careful when handling the glass. It is best to place it on a rather thick sheet.
  • Remove the window regulator completely. It is essential to remember your location well. You can take a picture of it if it helps you fit the new window regulator. The window regulator is regularly held by screws or rivets, so they will have to be removed.

The installation of an electric window regulator of a Toyota Avensis 3

  • Position the new window regulator. Make sure that its position is similar to the damaged window regulator. You will probably need to use the fasteners you put aside.
  • Replace the glass the same way you took it out. It will regularly be necessary to make it move slightly so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Replace the seals that you have carefully removed.
  • Refit the entire door trim.

It's done, you now have a new and functional window regulator . You will therefore have to switch on and test it.