The advantage of an electric window regulator is enormous in comparison with manual window regulators. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the cause of the failure. With this article, we will discover how to repair the electric window regulator of a Toyota Avensis Verso . But before you start, you have to be sure you know where the problem came from. Indeed, it is from time to time unnecessary to replace the entire window regulator, a simple small repair can sometimes work. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you have identified the nature of the dysfunction, let us return to our subject.change-window-regulator-Toyota-Avensis-Verso

How to replace a Toyota Avensis Verso window regulator

The replacement of a window regulator is rather long. Depending on your expertise on the subject, count approximately three hours to make sure you don't get caught up in time. Whether on a Toyota Avensis Verso or on another vehicle, this operation is for experienced DIY enthusiasts. So let's look at how to do it, step by step. We advise you to take photos at different times to help you reassemble the new window regulator.

Removing a window regulator on a Toyota Avensis Verso

  • Remove the entire door trim. From the handle to the mirror cover. This should be done very gently using a flat screwdriver. You will have to make sure you have access to the window regulator at all points without being embarrassed. This step is quite long to perform.
  • Remove the window regulator seals from your Toyota Avensis Verso. Again, it is crucial to do this carefully.
  • Now that you have accessed the window regulator, remove the connectors. You will then have to remove the motor from the window regulator when the window is stuck.
  • Remove all the fasteners that hold the glass, then take it out. It is from time to time more advisable to position the window halfway up to carry out this operation. Of course you will have to be very careful when moving the glass. It is best to put it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is essential to remember your position well. You can take a picture of it if it helps you to install the new window regulator. The window regulator is occasionally held in place by screws or rivets, so you will need to remove them.

The installation of an electric window regulator of a Toyota Avensis Verso

  • Position the new window regulator. Make sure that its location is identical to the damaged window regulator. You will certainly need to use the fasteners you have set aside.
  • Replace the glass as you removed it. It will occasionally be necessary to rotate it a little so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Replace the door trim assembly.

That's it, you now have a new and functional window regulator . You will therefore have to switch on and test it.