The advantage of an electric window regulator is undeniable compared to manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. In addition, it is not necessarily easy to pinpoint the cause of the problem. Here we will see how to replace the electric window regulator of a Toyota Avensis . But before you start, you need to be sure you know where the malfunction came from. Indeed, it is from time to time unnecessary to replace the entire window regulator, a simple repair can sometimes suffice. Whether it's a false contact, or simply a lack of oiling. Now that you are sure of the cause of the problem, let's get to the heart of the matter.change-window-regulator-Toyota-Avensis

How to replace a Toyota Avensis window regulator

Changing a window regulator is relatively time-consuming. Depending on your expertise on the subject, count approximately three hours to make sure you don't get caught in the weather. Whether it's on a Toyota Avensis or another car, this manipulation is for experienced DIY enthusiasts. So let's look at how to do it, step by step. We advise you to take a picture at different times to help you reassemble the new window regulator.

Removing a window regulator on a Toyota Avensis

  • Remove the entire door trim. From the mirror cover to the handle. This should be done relatively gently with a flat screwdriver. It will be necessary to ensure that you have access to the window regulator at any point without being disturbed. This step is quite long to perform.
  • Remove the window regulator seals from your Toyota Avensis. Again, it's important to do it delicately.
  • Now that you have access to the window regulator, remove the connectors. You must then remove the motor from the window regulator when the window is stuck.
  • Remove all the fasteners that hold the glass, then take it out. It is occasionally advisable to position the window halfway up to be able to carry out this manipulation. Obviously we will have to be super careful when moving the glass. It is advisable to place it on a sufficiently thick sheet.
  • Remove the window regulator as a whole. It is important to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held in place by screws or rivets, so they must be removed.

The installation of an electric window regulator of a Toyota Avensis

  • Introduce the new window regulator. Make sure that its location is identical to the damaged window regulator. You should probably use the fasteners that you have set aside.
  • Replace the glass just as you pulled it out. It will be necessary from time to time to rotate it a little so that it fits properly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Replace the entire door trim.

That's it, you now have a new and working window regulator . So you will need to turn on your car and test it.