The advantage of an electric window regulator is enormous in comparison with manual mechanisms. However, it has the defect of being much more restrictive in terms of repairs. Also, it is not always easy to pinpoint the source of the problem. With this article we will see how to change the electric window regulator of a Toyota Aygo 2 . But before you start, you need to be sure you understand where the malfunction is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple repair can often work. Whether it concerns an electrical short circuit, or simply a lack of lubrication. Now that you are sure of the nature of the problem, let us return to our subject.change-window-regulator-Toyota-Aygo-2

Replacing a Toyota Aygo 2 window regulator: how to do it

Changing a window regulator is relatively tedious. Depending on your experience on the subject, count approximately three hours to make sure you don't get caught in the weather. Whether it is for a Toyota Aygo 2 or another vehicle, this repair is for experienced DIY enthusiasts. So let's see how to do it, step by step. We advise you to take photos at different times to help you install the new window regulator.

Removing a window regulator on a Toyota Aygo 2

  • Dismantle the entire door trim. From the mirror cover to the handle. This should be done relatively gently with a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This step is the longest to complete.
  • Remove the window regulator seals from your Toyota Aygo 2. Again, it is essential to do this gently.
  • Now that you have access to the window regulator, disconnect the connectors. You must then remove the motor from the window regulator if it is stuck.
  • Take out all the fasteners that hold the glass, then remove it. It is sometimes advisable to position the window halfway up to carry out this manipulation. Of course you will have to be very careful when handling the glass. It is best to put it on a rather thick sheet.
  • Remove the window regulator entirely. It is essential to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held by screws or rivets, so you must remove them.

The installation of an electric window regulator of a Toyota Aygo 2

  • Position the new window regulator. Make sure that its location is similar to the damaged window regulator. You should certainly use the fasteners you have removed.
  • Replace the glass as you removed it. It will sometimes be necessary to move it slightly so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Refit all of the door trim.

That's it, you now have a new and functional window regulator . So you need to turn on your car and test it.