The advantage of an electric window regulator is substantial in comparison with manual mechanisms. On the other hand, it has the disadvantage of being much more restrictive in terms of repairs. In addition, it is not always easy to precisely identify the source of the failure. In this article we will find out how to replace the electric window regulator of a Toyota Camry 4 . But before seeing what to do next, you have to be sure you know where the problem is coming from. Indeed, it is regularly unnecessary to change the entire window regulator, a simple repair can sometimes work. Whether it's a false contact, or quite simply a lack of oiling. Now that you've identified the source of the concern, let's get back to our topic.change-window-regulator-Toyota-Camry-4

Replacing a Toyota Camry 4 window regulator: how to do it

Replacing a window regulator is quite tedious. Depending on your experience on the subject, plan about three hours to make sure you don't get caught up in the weather. Whether on a Toyota Camry 4 or on another car, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, point by point. We recommend that you take a picture at different times to help you reassemble the new window regulator.

Removing a window regulator on a Toyota Camry 4

  • Remove the entire door trim. From the handle to the retro cover. This manipulation must be done carefully enough using a flat screwdriver. You will have to make sure you have access to the window regulator at all points without being disturbed. This step is the longest to perform.
  • Remove the window regulator gaskets from your Toyota Camry 4. Again, it's important to do this carefully.
  • Now that you have access to the window regulator, remove the connectors. You will then have to disengage the motor from the window regulator if it is blocked.
  • Take out all the clips that hold the glass, then remove the glass. It is regularly preferable to place the window halfway up to be able to carry out this manipulation. Obviously you will have to be extremely careful when handling the glass. It is preferable to put it on a sufficiently thick sheet.
  • Remove the window regulator as a whole. It is important to remember your position well. You can take a picture of it if it can help you attach the new window regulator. The window regulator is regularly held by screws or rivets, it will therefore be necessary to remove them.

The installation of an electric window regulator of a Toyota Camry 4

  • Present the new window regulator. Check that its position is identical to the damaged window regulator. It will certainly be necessary to use the fasteners that you have put aside.
  • Replace the glass just as you took it out. It will regularly be necessary to make it move slightly so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Reassemble the door trim assembly.

It's good, you now have a new and working window regulator . You will therefore have to turn on your car and test it.