The advantage of an electric window regulator is considerable compared to manual systems. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not always easy to pinpoint the origin of the problem. Here we will see how to replace the electric window regulator of a Toyota Camry 5 . But before seeing the procedure to follow, you must be certain of knowing where the breakdown comes from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can sometimes work. Whether it's a false contact, or just a lack of lubrication. Now that you are sure of the source of the concern, let us return to our subject.change-window-regulator-Toyota-Camry-5

Replacing a Toyota Camry 5 window regulator: how to do it

Changing a window regulator is relatively time-consuming. Depending on your expertise on the subject, count approximately three hours to make sure you have the time you need. Whether it's on a Toyota Camry 5 or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's look at how to do it, step by step. We advise you to take pictures at several stages in order to help you reassemble the new window regulator.

Removing a window regulator on a Toyota Camry 5

  • Remove the entire door trim. From the handle to the mirror cover. This should be done relatively gently with a flat screwdriver. You will have to make sure to access the window regulator at any point without being embarrassed. This step is the longest to execute.
  • Disassemble the window regulator seals from your Toyota Camry 5. Again, it's wiser to do so with care.
  • Now that you have access to the window regulator, remove the connectors. You can then remove the motor from the window regulator if it is blocked.
  • Take out all the fasteners that hold the glass, then release it. It is sometimes better to position the window halfway up to carry out this manipulation. Of course we will have to be very careful when handling the glass. It is best to place it on a rather thick sheet.
  • Disassemble the window regulator as a whole. It is wiser to memorize your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is at times held in place by screws or rivets, so it will be necessary to remove them.

The installation of an electric window regulator of a Toyota Camry 5

  • Introduce the new window regulator. Make sure that its location is similar to the previous window regulator. You will probably need to use the fasteners that you removed.
  • Reposition the glass just as you removed it. At times it will be necessary to rotate it slightly so that it fits properly in its guide.
  • Connect the connectors.
  • Fit the seals you removed.
  • Reassemble the door trim assembly.

It's done, you now have a new and working window regulator . So you can put the ignition on and test it.