The interest of an electric window regulator is significant compared to manual systems. On the other hand, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the nature of the failure. In this article we will see how to replace the electric window regulator on a Toyota Corolla 5 . But before you start, you need to be sure you understand where the problem is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple repair will sometimes work. Whether it's a false contact, or simply a lack of oiling. Now that you've identified the source of the problem, let's get back to our topic.
Toyota Corolla 5 window regulator replacement: how to do it
Changing a window regulator is quite time consuming. Depending on your expertise on the subject, count about three hours to make sure you don't get caught up in the time. Whether for a Toyota Corolla 5 or another car, this repair is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. It is advisable to take a picture at different times in order to help you reassemble the new window regulator.
Removing a window regulator on a Toyota Corolla 5
- Disassemble the entire door trim. From the handle to the retro cover. This manipulation must be done quite delicately using a flat screwdriver. Make sure to access the window regulator at all points without being disturbed. This manipulation is the longest to perform.
- Remove the window regulator seals from your Toyota Corolla 5. Once again, it is essential to do this with care.
- Now that you have accessed the window regulator, remove the connectors. You can then remove the motor from the window regulator if it is blocked.
- Release all the clips that hold the glass in place, then remove the glass. It is sometimes more advisable to place the window halfway up to carry out this manipulation. Of course, you will have to be extremely careful when moving the window. It is advisable to put it on a rather thick sheet.
- Disassemble the window regulator completely. It is essential to remember your location well. You can take a picture of it if it can help you attach the new window regulator. The window regulator is sometimes held by screws or rivets, so you have to remove them.
The installation of an electric window of a Toyota Corolla 5
- Present the new window regulator. Make sure that its position is similar to the previous window regulator. You will probably need to use the fasteners you have set aside.
- Reposition the glass as you removed it. It will sometimes be necessary to make it move slightly so that it fits properly in its guide.
- Connect the connectors.
- Replace the seals you removed.
- Refit all of the door trim.
It's good, you now have a new and functional window regulator . So you can put the ignition on and test it.