The interest of an electric window regulator is undeniable compared to manual mechanisms. On the other hand, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not always easy to identify precisely the cause of the problem. Here we will see how to change the electric window on a Toyota Corolla 8 . But before you can see what to do, you need to be sure you know where the problem is coming from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can often work. Whether it concerns an electrical short circuit, or just a lack of lubrication. Now that you've identified the cause of the malfunction, let's get back to our topic.
Toyota Corolla 8 window regulator replacement: how to do it
Changing a window regulator is quite tedious. Depending on your experience on the subject, plan about two o'clock to make sure you have the necessary time. Whether on a Toyota Corolla 8 or on another vehicle, this repair is for experienced DIY enthusiasts. So let's see how to do it, point by point. We recommend that you take pictures at several stages in order to help you reassemble the new window regulator.
Removing a window regulator on a Toyota Corolla 8
- Remove the entire door trim. From mirror cover to handle. This manipulation must be done carefully enough using a flat screwdriver. Make sure you have access to the window regulator at all points without being hampered. This step is quite long to perform.
- Remove the window regulator gaskets from your Toyota Corolla 8. Once again, it is important to do this carefully.
- Now that you have accessed the window regulator, remove the connectors. You will then have to remove the motor from the window regulator if it is ever blocked.
- Take out all the fasteners that hold the window in place, then release the window. It is sometimes more advisable to position the window halfway up to perform this manipulation. Of course, extreme care must be taken when moving the glass. It is advisable to put it on a sufficiently thick sheet.
- Remove the window regulator completely. It is important to remember its location. You can take a picture of it if it helps you fit the new window regulator. The window regulator is sometimes held by screws or rivets, so you have to remove them.
The installation of an electric window of a Toyota Corolla 8
- Fit the new window regulator. Make sure that its location is similar to the damaged window regulator. You should definitely use the fasteners you removed.
- Replace the glass as you took it out. It will sometimes be necessary to make it move a little for it to put itself correctly in its guide.
- Reconnect the connectors.
- Replace the seals you removed.
- Replace the door trim assembly.
That's it, you now have a new and working window regulator . You will therefore have to switch on and test it.