The advantage of an electric window regulator is undeniable in comparison with manual systems. However, it has the drawback of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the source of the failure. In this article we will find out how to repair the electric window regulator of a Toyota Corolla 9 Ts . But before you start, you need to be sure you know where the problem came from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple small repair will often work. Whether it concerns a false contact, or just a lack of oiling. Now that you are sure what the source of the problem is, let's get to the heart of the matter.window-regulator-Toyota-Corolla-9-Ts

Toyota Corolla 9 Ts window regulator replacement: how to do it

Changing a window regulator is rather time-consuming. Depending on your experience in the field, plan approximately two o'clock to make sure you have the necessary time. Whether on a Toyota Corolla 9 Ts or on another vehicle, this operation is for experienced DIY enthusiasts. So let's take a look at what to do, step by step. It is advisable to take pictures at different times to help you fit the new window regulator.

Removing a window regulator on a Toyota Corolla 9 Ts

  • Remove the entire door trim. From the handle to the retro cover. This operation should be done rather carefully with a flat screwdriver. Make sure to access the window regulator at all points without being hampered. This step is the longest to perform.
  • Remove the window regulator seals from your Toyota Corolla 9 Ts. Again, it is essential to go about it with care.
  • Now that you have access to the window regulator, disconnect the connectors. You will then need to release the window regulator motor in the event that it is stuck.
  • Release all of the fasteners that hold the window in place, then release the window. It is sometimes better to place the glass halfway up to perform this operation. Of course you will have to be extremely careful when handling the glass. It is preferable to place it on a rather thick sheet.
  • Remove the window regulator completely. It is essential to remember your location. You can take a picture of it if it helps you fit the new window regulator. The window regulator is sometimes held by screws or rivets, so they will have to be removed.

The installation of an electric window of a Toyota Corolla 9 Ts

  • Present the new window regulator. Make sure that its location is similar to the damaged window regulator. You may need to use the fasteners you put aside.
  • Reposition the glass the same way you removed it. It will sometimes be necessary to rotate it a little so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Replace the seals that you have carefully removed.
  • Refit all of the door trim.

It's good, you now have a new and working window regulator . You will have to put the ignition on and test it.