The advantage of an electric window regulator is undeniable compared to manual mechanisms. However, it has the defect of being much more complex in terms of repairs. In addition, it is not always easy to identify precisely the source of the problem. Here we will see how to repair the electric window regulator of a Toyota Corolla Verso . But before you start, you have to be sure you understand where the malfunction is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple small repair will often work. Whether it's an electrical short circuit, or simply a lack of oil. Now that you've identified the source of the problem, let's get back to our topic.change-window-regulator-Toyota-Corolla-Verso

How to replace a Toyota Corolla Verso window regulator

Changing a window regulator is rather tedious. Depending on your experience in the field, plan approximately two o'clock to make sure you don't get caught up in time. Whether on a Toyota Corolla Verso or on another vehicle, this operation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. It is advisable to take pictures at different times to help you install the new window regulator.

Removing a window regulator on a Toyota Corolla Verso

  • Remove all of the door trim. From the mirror cover to the handle. This should be done rather gently with a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This manipulation is the longest to carry out.
  • Remove the window regulator seals from your Toyota Corolla Verso. Again, it is essential to take it delicately.
  • Now that you have access to the window regulator, remove the connectors. You can then release the window lifter motor if it is stuck.
  • Take out all the fasteners that hold the glass, then remove it. It is sometimes more advisable to place the window halfway up to be able to carry out this manipulation. Of course you will have to be very careful when handling the glass. It is best to place it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is essential to remember your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held in place by screws or rivets, so you must remove them.

The installation of an electric window regulator of a Toyota Corolla Verso

  • Introduce the new window regulator. Make sure that its position is similar to the damaged window lifter. You should probably use the fixings that you removed.
  • Reposition the glass in the same way as you took it out. It will sometimes be necessary to move it slightly so that it fits properly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Refit all of the door trim.

That's it, you now have a new and working window regulator . So you can switch on and test it.