The advantage of an electric window regulator is undeniable in comparison with manual systems. However, it has the disadvantage of being much more complex in terms of repairs. In addition, it is not always easy to pinpoint the source of the problem. Here we will see how to replace the electric window regulator on a Toyota Cs & s . But before seeing the procedure to follow, you must be sure to understand where the problem came from. Let us be clear, it is from time to time unnecessary to change the entire window regulator, a simple repair can sometimes be enough. Whether it's a false contact, or simply a lack of lubrication. Now that you are sure of the origin of the concern, let us return to our subject.
Toyota Cs & s window regulator replacement: how to do it
Replacing a window regulator is quite time consuming. Depending on your expertise in the field, count approximately two o'clock to make sure you have the necessary time. Whether on a Toyota Cs & s or on another vehicle, this repair is for experienced DIY enthusiasts. So let's see how to do it, step by step. We recommend that you take a picture at different times to help you fit the new window regulator.
Removing a window regulator on a Toyota Cs & s
- Remove all of the door trim. From the handle to the mirror cover. This should be done very gently using a flat screwdriver. It will be necessary to ensure that you have access to the window regulator at any point without being disturbed. This step is the longest to execute.
- Remove the window regulator seals from your Toyota Cs & s. Again, it is essential to do it delicately.
- Now that you have accessed the window regulator, disconnect the connectors. You must then remove the motor from the window regulator in case it is stuck.
- Remove all the fasteners that hold the glass, then take it out. It is from time to time preferable to place the window halfway up to be able to carry out this operation. Of course, extreme care must be taken when handling the glass. It is best to put it on a sufficiently thick sheet.
- Remove the window regulator as a whole. It is essential to memorize your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held by screws or rivets, so they must be removed.
The installation of an electric window of a Toyota Cs & s
- Introduce the new window regulator. Make sure that its position is similar to the previous window regulator. You will probably have to use the fasteners you have set aside.
- Replace the glass just as you removed it. It will occasionally be necessary to rotate it slightly so that it fits correctly in its guide.
- Connect the connectors.
- Replace the seals that you have carefully removed.
- Replace all of the door trim.
It's done, you now have a new and working window regulator . So you will need to turn on your car and test it.