The advantage of an electric window regulator is considerable compared to manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not always easy to identify precisely the source of the problem. In this article we will see how to change the electric window regulator of a Toyota Endo . But before seeing the procedure to follow, you must be sure to know where the failure comes from. Indeed, it is from time to time unnecessary to replace the entire window regulator, a simple repair will often work. Whether it's a false contact, or just a lack of lubrication. Now that you are sure of the origin of the concern, let us return to our subject.
How to replace a Toyota Endo window regulator
Changing a window regulator is rather tedious. Depending on your expertise on the subject, plan around three hours to make sure you have the time you need. Whether for a Toyota Endo or another vehicle, this repair is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take pictures at different times to help you mount the new window regulator.
Removing a window regulator on a Toyota Endo
- Remove the entire door trim. From the mirror cover to the handle. This should rather be done with care using a flat screwdriver. You must ensure that you access the window regulator at all points without being disturbed. This step is quite long to perform.
- Remove the window regulator seals from your Toyota Endo. Again, it is important to take it delicately.
- Now that you have accessed the window regulator, remove the connectors. You must then remove the motor from the window regulator when the window is blocked.
- Release all the fasteners that hold the glass, then take it out. It is from time to time advisable to place the window halfway up to be able to carry out this manipulation. Obviously you have to be very careful when handling the glass. It is best to place it on a sufficiently thick sheet.
- Remove the window regulator completely. It is important to remember its location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is occasionally held in place by screws or rivets, so you must remove them.
The installation of an electric window regulator of a Toyota Endo
- Fit the new window regulator. Make sure that its location is identical to the previous window regulator. You should definitely use the fasteners you removed.
- Reposition the glass as you removed it. It will be necessary from time to time to rotate it slightly so that it fits properly in its guide.
- Reconnect the connectors.
- Fit the seals you removed.
- Refit the entire door trim.
That's it, you now have a new and functional window regulator . So you have to put the ignition on and test it.