The interest of an electric window regulator is significant compared to manual mechanisms. However, it has the disadvantage of being much more complex in terms of repairs. Also, it is not necessarily easy to identify precisely the nature of the problem. In this article we will see How to repair the electric window of a Toyota Es3 . But before you start, you need to be sure you know where the failure came from. Indeed, it is regularly unnecessary to change the entire window regulator, a simple small repair can often suffice. Whether it's a false contact, or just a lack of oiling. Now that you've identified the nature of the concern, let's get back to our topic.change-window-Toyota-Es3

Toyota Es3 window regulator replacement: how to do it

Changing a window regulator is quite time consuming. Depending on your expertise in the field, count approximately three hours in order to be sure to have the necessary time. Whether on a Toyota Es3 or on another car, this operation is for experienced handymen. So let's see how to do it, point by point. We recommend that you take a picture in several steps to help you fit the new window regulator.

Removing a window regulator on a Toyota Es3

  • Remove the entire door trim. From mirror cover to handle. This operation should be done carefully enough using a flat screwdriver. You must ensure that you can access the window regulator at all points without being hindered. This manipulation is quite long to perform.
  • Remove the window regulator seals from your Toyota Es3. Again, it's wiser to go about it carefully.
  • Now that you have accessed the window regulator, disconnect the connectors. You must then remove the motor from the window regulator if it is blocked.
  • Release all the fasteners that hold the glass, then remove the glass. It is regularly better to place the glass halfway up to perform this operation. Of course, you will have to be extremely careful when moving the window. It is advisable to place it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is wiser to retain your position well. You can take a picture of it if it helps you attach the new window regulator. The window regulator is regularly held by screws or rivets, so they must be removed.

The installation of an electric window of a Toyota Es3

  • Fit the new window regulator. Make sure that its location is identical to the damaged window regulator. You will certainly need to use the fasteners you removed.
  • Reposition the glass the same way you took it out. It will regularly be necessary to make it move slightly so that it fits properly in its guide.
  • Reconnect the connectors.
  • Fit the seals that you have carefully removed.
  • Reassemble the door trim assembly.

It's done, you now have a new and working window regulator . So you need to turn on your car and test it.