The advantage of an electric window regulator is undeniable in comparison with manual mechanisms. However, it has the disadvantage of being much more complicated in terms of repairs. In addition, it is not necessarily easy to identify precisely the source of the failure. With this article we will see how to repair the electric window regulator of a Toyota Fine-n . But before you start, you need to be sure you know where the fault came from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair will sometimes suffice. Whether it's a false contact, or just a lack of lubrication. Now that you've identified the source of the concern, let's get back to our topic.change-window-regulator-Toyota-Fine-n

Replacing a Toyota Fine-n window regulator: how to do it

Replacing a window regulator is quite time consuming. Depending on your expertise in the field, plan approximately three hours to make sure you have the time you need. Whether for a Toyota Fine-n or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's look at what to do, step by step. We advise you to take pictures at several stages in order to help you mount the new window regulator.

Removing a window regulator on a Toyota Fine-n

  • Remove all of the door trim. From the mirror cover to the handle. This should be done with enough caution using a flat screwdriver. It will be necessary to make sure to have access to the window regulator in any point without being obstructed. This step is the longest to execute.
  • Remove the window regulator seals from your Toyota Fine-n. Again, it's important to be careful.
  • Now that you have accessed the window regulator, disconnect the connectors. You can then remove the motor from the window regulator if it is blocked.
  • Release all the fasteners that hold the window, then release it. It is sometimes better to place the window halfway up to be able to carry out this operation. Of course you will have to be very careful when moving the glass. It is advisable to put it on a sufficiently thick sheet.
  • Remove the window regulator entirely. It is important to remember your position correctly. You can take a picture of it if it helps you fix the new window regulator. The window regulator is at times held in place by screws or rivets, so you must remove them.

The installation of an electric window regulator of a Toyota Fine-n

  • Present the new window regulator. Make sure that its position is similar to the damaged window lifter. You will certainly need to use the fasteners you have removed.
  • Replace the glass as you removed it. At times it will be necessary to rotate it slightly so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Replace the seals that you have carefully removed.
  • Replace all of the door trim.

It's good, you now have a new and working window regulator . So you can put the ignition on and test it.