The advantage of an electric window regulator is undeniable in comparison with manual mechanisms. However, it has the drawback of being much more complex in terms of repairs. Also, it is not always easy to determine precisely the nature of the problem. In this article we will see How to repair the electric window regulator of a Toyota Ft-86 (2) . But before seeing what to do next, you have to be sure you know where the problem is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple repair can sometimes suffice. Whether it concerns a false contact, or quite simply a lack of oiling. Now that you're sure what the concern is, let's get to the heart of the matter.
Toyota Ft-86 (2) window regulator replacement: how to do it
The replacement of a window regulator is relatively long. Depending on your experience on the subject, plan about three hours to make sure you have the necessary time. Whether on a Toyota Ft-86 (2) or on another car, this manipulation is for experienced DIY enthusiasts. So let's look at what to do, point by point. We recommend that you take pictures at different times to help you reassemble the new window regulator.
Removing a window regulator on a Toyota Ft-86 (2)
- Remove the entire door trim. From mirror cover to handle. This operation should be done relatively gently using a flat screwdriver. It will be necessary to make sure to have access to the window regulator at all points without being disturbed. This manipulation is the longest to perform.
- Remove the window regulator seals from your Toyota Ft-86 (2). Again, it's important to go about it gently.
- Now that you have accessed the window regulator, remove the connectors. You can then remove the motor from the window regulator when the window is blocked.
- Remove all the clips that hold the glass in place, then remove the glass. It is sometimes preferable to place the glass halfway up to perform this operation. Obviously you have to be very careful when handling the glass. It is best to place it on a rather thick sheet.
- Remove the window regulator completely. It is important to remember your position well. You can take a picture of it if it helps you attach the new window regulator. The window regulator is sometimes held by screws or rivets, so you have to remove them.
The installation of an electric window of a Toyota Ft-86 (2)
- Introduce the new window regulator. Make sure that its location is identical to the damaged window regulator. You will probably have to use the clips you removed.
- Reposition the glass as you removed it. It will sometimes be necessary to rotate it slightly so that it fits correctly in its guide.
- Reconnect the connectors.
- Fit the seals that you have carefully removed.
- Refit all of the door trim.
It's done, you now have a new and functional window regulator . So you can turn on your car and test it.