The advantage of an electric window regulator is enormous compared to manual systems. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not always easy to identify precisely the cause of the failure. In this article, we will discover how to change the electric window regulator of a Toyota Ft-hs . But before seeing the procedure to follow, you must be certain to know where the failure came from. Let's be clear, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can often work. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you are sure of the cause of the malfunction, let's get to the heart of the matter.
Replacing a Toyota Ft-hs window regulator: how to do it
The replacement of a window regulator is rather long. Depending on your expertise in the field, count approximately three hours to make sure you don't get caught up in time. Whether it's on a Toyota Ft-hs or another car, this repair is for experienced do-it-yourselfers. So let's see how to do it, step by step. We advise you to take a photo at several stages in order to help you mount the new window regulator.
Removing a window regulator on a Toyota Ft-hs
- Remove all of the door trim. From the handle to the mirror cover. This should rather be done with care with a flat screwdriver. You will have to make sure you have access to the window regulator at any point without being disturbed. This step is quite long to perform.
- Remove the window regulator seals from your Toyota Ft-hs. Again, it is wiser to take it delicately.
- Now that you have accessed the window regulator, remove the connectors. You can then remove the motor from the window regulator when the window is blocked.
- Release all of the fasteners that hold the glass, then take it out. It is sometimes advisable to place the window halfway up to carry out this manipulation. Obviously, extreme care must be taken when handling the glass. It is advisable to place it on a sufficiently thick sheet.
- Remove the window regulator as a whole. It is wiser to remember your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held in place by screws or rivets, so they must be removed.
The installation of an electric window regulator of a Toyota Ft-hs
- Introduce the new window regulator. Make sure its location is similar to the damaged window regulator. You probably need to use the fasteners that you have set aside.
- Replace the glass as you removed it. It will sometimes be necessary to rotate it a little so that it fits correctly in its guide.
- Reconnect the connectors.
- Replace the seals that you have carefully removed.
- Refit all of the door trim.
It's done, you now have a new and working window regulator . So you can turn on your car and test it.