The advantage of an electric window regulator is considerable compared to manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to pinpoint the nature of the problem. Here we will see how to repair the electric window regulator of a Toyota Fxs . But before you start, you need to be sure you know where the malfunction is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple small repair will sometimes be enough. Whether it's an electrical short circuit, or just a lack of oil. Now that you're sure of the cause, let's get to the heart of the matter.
Replacing a Toyota Fxs window regulator: how to do it
Replacing a window regulator is relatively time-consuming. Depending on your expertise on the subject, count approximately three hours to make sure you don't get caught in the weather. Whether for a Toyota Fxs or another car, this operation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take photos at different times to help you mount the new window regulator.
Removing a window regulator on a Toyota Fxs
- Remove the entire door trim. From the handle to the mirror cover. This should be done relatively carefully using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being obstructed. This manipulation is the longest to execute.
- Disassemble the window regulator seals from your Toyota Fxs. Again, it is essential to take it delicately.
- Now that you have accessed the window regulator, disconnect the connectors. You will then have to disengage the window lifter motor if it is stuck.
- Release all the fasteners that hold the window, then release it. It is sometimes more advisable to position the window halfway up to be able to carry out this manipulation. Of course, extreme care must be taken when handling the glass. It is advisable to place it on a sufficiently thick sheet.
- Disassemble the window regulator completely. It is essential to memorize your location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held by screws or rivets, it will therefore be necessary to remove them.
The installation of an electric window regulator of a Toyota Fxs
- Present the new window regulator. Make sure that its location is similar to the previous window regulator. You probably need to use the fasteners you removed.
- Reposition the glass just as you removed it. It will sometimes be necessary to move it a little so that it fits correctly in its guide.
- Connect the connectors.
- Replace the seals that you have carefully removed.
- Replace the door trim assembly.
It's good, you now have a new and working window regulator . You will therefore have to turn on your car and test it.