The advantage of an electric window regulator is enormous compared to manual window regulators. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not always easy to identify precisely the nature of the failure. In this article, we will discover how to replace the electric window regulator of a Toyota Hi Ace . But before seeing the procedure to follow, you must be sure to understand where the failure comes from. Let's be clear, it is sometimes unnecessary to change the entire window regulator, a simple repair will sometimes work. Whether it concerns an electrical short circuit, or just a lack of lubrication. Now that you are sure of the nature of the concern, let's get back to our topic.window-changer-Toyota-Hi-Ace

Replacing a Toyota Hi Ace window regulator: how to do it

Replacing a window regulator is quite time consuming. Depending on your experience in the field, plan approximately two o'clock to make sure you don't get caught in the weather. Whether on a Toyota Hi Ace or another car, this operation is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take photos at several stages to help you reassemble the new window regulator.

Removing a window regulator on a Toyota Hi Ace

  • Dismantle the entire door trim. From the mirror cover to the handle. This should be done with enough caution using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being obstructed. This step is the longest to complete.
  • Disassemble the window regulator seals from your Toyota Hi Ace. Again, it's important to be careful.
  • Now that you have accessed the window regulator, disconnect the connectors. You must then remove the motor from the window regulator when the window is blocked.
  • Release all the fasteners that hold the window, then release it. It is sometimes advisable to position the window halfway up to be able to carry out this manipulation. Obviously we will have to be super careful when handling the glass. It is best to place it on a rather thick sheet.
  • Disassemble the window regulator as a whole. It is important to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held in place by screws or rivets, you must therefore remove them.

The installation of an electric window regulator of a Toyota Hi Ace

  • Introduce the new window regulator. Make sure that its position is similar to the previous window regulator. You should definitely use the fasteners you removed.
  • Reposition the glass just as you took it out. It will sometimes be necessary to move it slightly so that it fits correctly in its guide.
  • Connect the connectors.
  • Replace the seals that you have carefully removed.
  • Refit all of the door trim.

That's it, you now have a new and functional window regulator . You will therefore have to switch on and test it.