The value of an electric window regulator is enormous compared to manual window regulators. However, it has the drawback of being much more complicated in terms of repairs. In addition, it is not necessarily easy to pinpoint the source of the failure. In this article we will see how to repair the electric window regulator of a Toyota Hilux 3 . But before seeing what to do next, you have to be sure you understand where the failure is coming from. Indeed, it is regularly unnecessary to replace the entire window regulator, a simple repair can often suffice. Whether it's an electrical short circuit, or just a lack of lubrication. Now that you're sure what the concern is, let's get to the heart of the matter.
Replacing a window regulator in Toyota Hilux 3: how to do it
Changing a window regulator is relatively tedious. Depending on your experience on the subject, plan about three hours to make sure you don't get caught up in the weather. Whether for a Toyota Hilux 3 or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, point by point. It is advisable to take pictures at several stages to help you fit the new window regulator.
Removing a window regulator on a Toyota Hilux 3
- Disassemble the entire door trim. From mirror cover to handle. This operation must be done relatively carefully using a flat screwdriver. You must ensure that you can access the window regulator at all points without being obstructed. This manipulation is the longest to perform.
- Remove the window regulator seals from your Toyota Hilux 3. Once again, it is important to do this with caution.
- Now that you have access to the window regulator, remove the connectors. You must then take out the motor of the window regulator when it is blocked.
- Release all the clips that hold the glass in place, then remove the glass. It is regularly better to position the window halfway up to perform this operation. Obviously you will have to be very careful when moving the glass. It is advisable to put it on a sufficiently thick sheet.
- Remove the window regulator as a whole. It is important to remember your location well. You can take a picture of it if it helps you fit the new window regulator. The window regulator is regularly held by screws or rivets, they must therefore be removed.
The installation of an electric window regulator of a Toyota Hilux 3
- Position the new window regulator. Make sure that its position is similar to the damaged window lifter. You will certainly need to use the fasteners you removed.
- Replace the glass as you took it out. It will regularly be necessary to rotate it a little so that it fits correctly in its guide.
- Connect the connectors.
- Replace the seals you removed.
- Reassemble the door trim assembly.
That's it, you now have a new and working window regulator . You must therefore turn on your car and test it.