The interest of an electric window regulator is undeniable compared to manual mechanisms. On the other hand, it has the drawback of being much more restrictive in terms of repairs. Also, it is not necessarily easy to precisely identify the nature of the failure. Here we will see how to repair the electric window regulator of a Toyota Hilux 4 . But before you start, you have to be sure you understand where the problem is coming from. Indeed, it is from time to time useless to change the entire window regulator, a simple small repair will sometimes suffice. Whether it's a bad contact, or just a lack of lubrication. Now that you're sure what's causing the problem, let's get to the heart of the matter.change-window-regulator-Toyota-Hilux-4

Replacing a window regulator in Toyota Hilux 4: how to do it

Changing a window regulator is rather tedious. Depending on your experience in the field, count approximately three hours in order to be sure that you have the necessary time. Whether on a Toyota Hilux 4 or on another car, this manipulation is for experienced handymen. So let's see how to do it, point by point. We recommend that you take pictures in several steps to help you fit the new window regulator.

Removing a window regulator on a Toyota Hilux 4

  • Disassemble the entire door trim. From mirror cover to handle. This manipulation should be done rather delicately with a flat screwdriver. You will have to make sure to access the window regulator at all points without being disturbed. This step is quite long to complete.
  • Remove the window regulator seals from your Toyota Hilux 4. Once again, it is essential to go about it with care.
  • Now that you have accessed the window regulator, remove the connectors. You will then need to disengage the window regulator motor when it is stuck.
  • Remove all the clips that hold the glass in place, then remove the glass. From time to time it is advisable to place the window halfway up to carry out this manipulation. Of course you have to be very careful when handling the glass. It is preferable to place it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is essential to remember your location. You can take a picture of it if it helps you attach the new window regulator. The window regulator is from time to time held by screws or rivets, it will therefore be necessary to remove them.

The installation of an electric window regulator of a Toyota Hilux 4

  • Position the new window regulator. Make sure that its location is similar to the previous window regulator. You may need to use the clips you removed.
  • Replace the glass just as you removed it. It will be necessary from time to time to make it move slightly so that it fits properly in its guide.
  • Reconnect the connectors.
  • Fit the seals that you have carefully removed.
  • Replace the door trim assembly.

That's it, you now have a new and functional window regulator . You will therefore have to turn on your car and test it.