The advantage of an electric window regulator is enormous in comparison with manual window regulators. However, it has the disadvantage of being much more restrictive in terms of repairs. In addition, it is not necessarily easy to identify precisely the source of the problem. Here we will find out how to repair the electric window regulator of a Toyota Hilux . But before seeing the procedure to follow, you must be certain to understand where the dysfunction comes from. Indeed, it is from time to time unnecessary to change the entire window regulator, a simple repair will often suffice. Whether it concerns a false contact, or simply a lack of lubrication. Now that you are sure of the cause of the problem, let's get back to our topic.
Replacing a Toyota Hilux window regulator: how to do it
The replacement of a window regulator is quite long. Depending on your expertise in the field, count approximately two o'clock to make sure you don't get caught up in time. Whether it is for a Toyota Hilux or on another vehicle, this repair is for experienced DIY enthusiasts. So let's see how to do it, step by step. We advise you to take pictures at different times to help you mount the new window regulator.
Removing a window regulator on a Toyota Hilux
- Remove all of the door trim. From the handle to the mirror cover. This should be done with enough caution using a flat screwdriver. It will be necessary to ensure that you have access to the window regulator at any point without being disturbed. This step is quite long to perform.
- Remove the window regulator seals from your Toyota Hilux. Again, it's important to be careful.
- Now that you have accessed the window regulator, remove the connectors. You must then disengage the window lifter motor if it is ever blocked.
- Remove all the clips that hold the glass, then remove the glass. It is from time to time more advisable to place the window halfway up to perform this operation. Of course you will have to be very careful when handling the glass. It is advisable to put it on a rather thick sheet.
- Remove the window regulator completely. It is important to remember your position correctly. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held in place by screws or rivets, you must therefore remove them.
The installation of an electric window regulator of a Toyota Hilux
- Present the new window regulator. Make sure that its position is similar to the previous window regulator. You will probably need to use the clips you removed.
- Replace the glass in the same way as you removed it. It will be necessary from time to time to rotate it a little so that it fits properly in its guide.
- Connect the connectors.
- Fit the seals that you have carefully removed.
- Replace all of the door trim.
It's good, you now have a new and working window regulator . You must therefore turn on your car and test it.