The advantage of an electric window regulator is enormous in comparison with manual window regulators. However, it has the defect of being much more restrictive in terms of repairs. Also, it is not necessarily easy to identify precisely the cause of the failure. Here we will see how to repair the electric window regulator of a Toyota Iq . But before you start, you need to be sure you understand where the problem is coming from. Let's be clear, it is regularly unnecessary to replace the entire window regulator, a simple small repair can often work. Whether it concerns an electrical short circuit, or simply a lack of oiling. Now that you are sure of the cause of the problem, let's get to the heart of the matter.
Replacing a Toyota Iq window regulator: how to do it
The replacement of a window regulator is rather long. Depending on your expertise on the subject, count approximately three hours to make sure you don't get caught in the weather. Whether on a Toyota Iq or another vehicle, this operation is for experienced DIY enthusiasts. So let's take a look at what to do, step by step. We advise you to take pictures at several stages to help you reassemble the new window regulator.
Removing a window regulator on a Toyota Iq
- Remove all of the door trim. From the mirror cover to the handle. This should be done very gently with a flat screwdriver. It will be necessary to ensure that you have access to the window regulator at any point without being disturbed. This step is quite long to perform.
- Remove the window regulator seals from your Toyota Iq. Again, it is crucial to do it carefully.
- Now that you have access to the window regulator, remove the connectors. You must then remove the motor from the window regulator when it is stuck.
- Release all the fasteners that hold the window, then release it. It is regularly advisable to position the window halfway up to be able to carry out this operation. Of course we will have to be extremely careful when moving the glass. It is advisable to place it on a rather thick sheet.
- Remove the window regulator completely. It is essential to memorize your location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is regularly held by screws or rivets, so you must remove them.
The installation of an electric window regulator of a Toyota Iq
- Present the new window regulator. Make sure that its location is similar to the damaged window lifter. You probably need to use the fixings you removed.
- Reposition the glass in the same way as you removed it. It will regularly be necessary to move it slightly so that it fits correctly in its guide.
- Reconnect the connectors.
- Replace the seals that you have carefully removed.
- Refit all of the door trim.
It's good, you now have a new and working window regulator . You will need to turn on your car and test it.