The advantage of an electric window regulator is undeniable compared to manual systems. However, it has the disadvantage of being much more complicated in terms of repairs. In addition, it is not always easy to pinpoint the source of the problem. In this article, we will see how to repair the electric window regulator of a Toyota Land Cruiser Serie 40 . But before seeing the procedure to follow, you must be certain to understand where the failure came from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair will sometimes work. Whether it concerns a false contact, or simply a lack of lubrication. Now that you've identified the cause of the malfunction, let's go back to our topic.window-changer-Toyota-Land-Cruiser-Serie-40

Replacing a window regulator in Toyota Land Cruiser Serie 40: how to do it

Replacing a window regulator is quite tedious. Depending on your expertise in the field, plan approximately three hours to make sure you have the time you need. Whether for a Toyota Land Cruiser Serie 40 or another car, this manipulation is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take photos at different times to help you reassemble the new window regulator.

Removing a window regulator on a Toyota Land Cruiser Serie 40

  • Remove all of the door trim. From the handle to the mirror cover. This should be done with enough caution using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This step is quite long to perform.
  • Remove the window regulator seals from your Toyota Land Cruiser Serie 40. Again, it's important to do it with care.
  • Now that you have accessed the window regulator, disconnect the connectors. You must then remove the motor from the window regulator if it is stuck.
  • Take out all the fixings that hold the glass, then take it out. It is sometimes more advisable to place the window halfway up to be able to carry out this operation. Of course, extreme care must be taken when moving the glass. It is best to put it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is important to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held by screws or rivets, so you must remove them.

The installation of an electric window regulator of a Toyota Land Cruiser Serie 40

  • Fit the new window regulator. Make sure that its position is similar to the damaged window lifter. You should probably use the fixings that you removed.
  • Replace the glass in the same way as you removed it. Sometimes it will be necessary to move it slightly so that it fits properly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Replace all of the door trim.

It's good, you now have a new and working window regulator . So you have to put the ignition on and test it.