The advantage of an electric window regulator is substantial in comparison with manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to pinpoint the cause of the problem. Here we will see how to change the electric window regulator of a Toyota Mirai . But before you start, you need to be sure you understand where the malfunction is coming from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can sometimes work. Whether it concerns a false contact, or just a lack of oiling. Now that you are sure of the cause of the concern, let us return to our subject.
Replacing a Toyota Mirai window regulator: how to do it
Replacing a window regulator is rather time-consuming. Depending on your experience in the field, count approximately two o'clock to make sure you have the time you need. Whether it is a Toyota Mirai or another car, this operation is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take pictures at several stages in order to help you mount the new window regulator.
Removing a window regulator on a Toyota Mirai
- Remove the entire door trim. From the handle to the mirror cover. Rather, this should be done with care using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being obstructed. This step is the longest to perform.
- Remove the window regulator seals from your Toyota Mirai. Again, it is essential to take it delicately.
- Now that you have accessed the window regulator, disconnect the connectors. You must then release the window lifter motor if it is ever stuck.
- Release all the fasteners that hold the window, then release it. It is sometimes better to place the window halfway up to be able to carry out this operation. Of course you will have to be very careful when handling the glass. It is advisable to put it on a sufficiently thick sheet.
- Remove the window regulator as a whole. It is essential to remember your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held by screws or rivets, so they must be removed.
The installation of an electric window regulator of a Toyota Mirai
- Fit the new window regulator. Make sure that its location is identical to the damaged window regulator. You will probably need to use the bindings that you have set aside.
- Replace the glass as you removed it. It will sometimes be necessary to move it slightly so that it fits properly in its guide.
- Connect the connectors.
- Replace the seals you removed.
- Reassemble the door trim assembly.
That's it, you now have a new and working window regulator . So you have to put the ignition on and test it.