The advantage of an electric window regulator is substantial in comparison with manual mechanisms. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to identify precisely the nature of the failure. With this article we will see how to change the electric window regulator of a Toyota Model F . But before you start, you need to be sure you understand where the malfunction is coming from. Indeed, it is regularly unnecessary to change the entire window regulator, a simple small repair will sometimes suffice. Whether it's a false contact, or just a lack of oiling. Now that you've identified the cause of the problem, let's get to the heart of the matter.
Replacing a Toyota Model F window regulator: how to do it
Replacing a window regulator is relatively tedious. Depending on your experience in the field, count approximately three hours to make sure you don't get caught up in time. Whether on a Toyota Model F or another car, this operation is for experienced DIY enthusiasts. So let's take a look at what to do, step by step. We advise you to take photos at different times to help you reassemble the new window regulator.
Removing a window regulator on a Toyota Model F
- Remove the entire door trim. From the handle to the mirror cover. This should be done relatively carefully with a flat screwdriver. You must ensure that you have access to the window regulator at all points without being embarrassed. This manipulation is the longest to execute.
- Remove the window regulator seals from your Toyota Model F. Again, it is essential to do this gently.
- Now that you have accessed the window regulator, disconnect the connectors. You can then release the window lifter motor when it is stuck.
- Take out all the fasteners that hold the glass, then remove it. It is regularly preferable to place the window halfway up to carry out this manipulation. Naturally, extreme care must be taken when handling the glass. It is advisable to place it on a sufficiently thick sheet.
- Remove the window regulator completely. It is essential to remember your position well. You can take a picture of it if it helps you fix the new window regulator. The window regulator is regularly held by screws or rivets, it will therefore be necessary to remove them.
The installation of an electric window regulator of a Toyota Model F
- Position the new window regulator. Make sure that its position is identical to the previous window regulator. You must certainly use the fasteners you have set aside.
- Replace the glass just as you pulled it out. It will regularly be necessary to rotate it slightly so that it fits properly in its guide.
- Reconnect the connectors.
- Fit the seals you removed.
- Replace the entire door trim.
It's done, you now have a new and working window regulator . So you can turn on your car and test it.