The advantage of an electric window regulator is substantial in comparison with manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. In addition, it is not necessarily easy to identify precisely the nature of the failure. Here we will see how to change the electric window regulator of a Toyota Mr . But before you start, you need to be sure you understand where the malfunction is coming from. Let's be clear, it is regularly unnecessary to replace the entire window regulator, a simple small repair can sometimes work. Whether it concerns a false contact, or simply a lack of oiling. Now that you are sure of the source of the problem, let's get to the heart of the matter.change-window-regulator-Toyota-Mr

Replacing a Toyota Mr window regulator: how to do it

Changing a window regulator is rather time-consuming. Depending on your expertise in the field, plan approximately three hours to make sure you don't get caught up in time. Whether for a Toyota Mr or another car, this operation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take pictures at several stages to help you assemble the new window regulator.

Removing a window regulator on a Toyota Mr

  • Remove the entire door trim. From the mirror cover to the handle. Rather, this should be done with care using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being disturbed. This step is the longest to execute.
  • Remove the window regulator seals from your Toyota M. Again, it's important to do this carefully.
  • Now that you have accessed the window regulator, remove the connectors. You can then disengage the window lifter motor in the event that it is stuck.
  • Take out all the fixings that hold the glass, then take it out. It is regularly advised to place the window halfway up to be able to carry out this operation. Obviously you have to be very careful when handling the glass. It is advisable to put it on a rather thick sheet.
  • Remove the window regulator as a whole. It is important to remember its location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is regularly held in place by screws or rivets, so you must remove them.

The installation of an electric window regulator of a Toyota Mr

  • Present the new window regulator. Make sure that its position is similar to the previous window regulator. You should probably use the fixings you removed.
  • Reposition the glass in the same way as you removed it. It will regularly be necessary to move it slightly so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Replace the entire door trim.

It's good, you now have a new and working window regulator . So you can turn on your car and test it.