The advantage of an electric window regulator is enormous compared to manual mechanisms. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to identify precisely the cause of the failure. Here we will see how to repair the electric window regulator of a Toyota Mtrc . But before you start, you need to be sure you know where the failure is coming from. Indeed, it is from time to time unnecessary to change the entire window regulator, a simple small repair will often work. Whether it concerns a false contact, or just a lack of lubrication. Now that you've identified the cause of the concern, let's get back to our topic.change-window-regulator-Toyota-Mtrc

Replacing a Toyota Mtrc window regulator: how to do it

Changing a window regulator is relatively long. Depending on your expertise on the subject, count approximately two o'clock to make sure you don't get caught up in time. Whether for a Toyota Mtrc or another vehicle, this manipulation is for experienced DIY enthusiasts. So let's look at how to do it, step by step. It is advisable to take pictures at several stages to help you reassemble the new window regulator.

Removing a window regulator on a Toyota Mtrc

  • Remove the entire door trim. From the mirror cover to the handle. This should be done relatively carefully using a flat screwdriver. You will have to make sure you have access to the window regulator at any point without being disturbed. This step is quite long to perform.
  • Remove the window regulator seals from your Toyota Mtrc. Again, it is crucial to do it delicately.
  • Now that you have accessed the window regulator, remove the connectors. You must then remove the motor from the window regulator if it is stuck.
  • Release all the fasteners that hold the glass, then take it out. It is from time to time preferable to place the window halfway up to be able to carry out this manipulation. Naturally, great care must be taken when handling the glass. It is best to place it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is essential to memorize your location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held in place by screws or rivets, so they must be removed.

The installation of an electric window regulator of a Toyota Mtrc

  • Present the new window regulator. Make sure that its position is similar to the damaged window lifter. You will probably need to use the fasteners you have set aside.
  • Replace the glass just as you took it out. It will be necessary from time to time to make it move slightly so that it fits correctly in its guide.
  • Connect the connectors.
  • Replace the seals that you have carefully removed.
  • Replace the entire door trim.

It's done, you now have a new and functional window regulator . So you have to turn on your car and test it.