The advantage of an electric window regulator is undeniable compared to manual systems. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the source of the problem. With this article, we will discover how to replace the electric window regulator of a Toyota Paseo . But before seeing the procedure to follow, you must be certain to understand where the dysfunction came from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair can sometimes work. Whether it concerns a false contact, or simply a lack of oiling. Now that you're sure where the problem is, let's get to the heart of the matter.
Replacing a Toyota Paseo window regulator: how to do it
Replacing a window regulator is rather tedious. Depending on your expertise in the field, plan approximately two o'clock to make sure you have the time you need. Whether on a Toyota Paseo or another car, this operation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take photos at different times to help you reassemble the new window regulator.
Removing a window regulator on a Toyota Paseo
- Remove all of the door trim. From the handle to the mirror cover. This should be done rather gently with a flat screwdriver. You will have to make sure to access the window regulator at any point without being embarrassed. This step is the longest to execute.
- Remove the window regulator seals from your Toyota Paseo. Again, it is wiser to do it carefully.
- Now that you have accessed the window regulator, remove the connectors. You can then remove the motor from the window regulator if it is stuck.
- Remove all of the clips that hold the glass, then remove the glass. It is sometimes better to position the window halfway up to carry out this manipulation. Of course, extreme care must be taken when handling the glass. It is best to place it on a sufficiently thick sheet.
- Remove the window regulator as a whole. It is wiser to remember its location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held by screws or rivets, so you must remove them.
The installation of an electric window regulator of a Toyota Paseo
- Present the new window regulator. Make sure that its position is similar to the previous window regulator. You will certainly need to use the fasteners you have set aside.
- Replace the glass in the same way as you removed it. Sometimes it will be necessary to move it slightly so that it fits properly in its guide.
- Reconnect the connectors.
- Fit the seals that you have carefully removed.
- Replace all of the door trim.
That's it, you now have a new and functional window regulator . So you can put the ignition on and test it.