The advantage of an electric window regulator is substantial in comparison with manual mechanisms. However, it has the disadvantage of being much more restrictive in terms of repairs. Also, it is not necessarily easy to identify precisely the cause of the problem. Here we will see how to replace the electric window regulator of a Toyota Picnic . But before seeing the procedure to follow, you must be sure to know where the dysfunction came from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple small repair will sometimes work. Whether it's a false contact, or simply a lack of lubrication. Now that you are sure of the source of the problem, let us return to our subject.change-window-lift-Toyota-Picnic

Replacing a Toyota Picnic window regulator: how to do it

The replacement of a window regulator is quite long. Depending on your experience on the subject, count approximately two o'clock to make sure you don't get caught in the weather. Whether it is for a Toyota Picnic or on another vehicle, this repair is for experienced DIY enthusiasts. So let's see how to do it, step by step. It is advisable to take pictures at several stages in order to help you mount the new window regulator.

Removing a window regulator on a Toyota Picnic

  • Remove all of the door trim. From the mirror cover to the handle. This should be done with enough caution using a flat screwdriver. You will have to make sure to access the window regulator at any point without being disturbed. This step is quite long to perform.
  • Disassemble the window regulator seals from your Toyota Picnic. Again, it is essential to do it delicately.
  • Now that you have accessed the window regulator, remove the connectors. You must then release the window lifter motor if it is ever blocked.
  • Remove all the fasteners that hold the window, then remove the window. It is sometimes more advisable to position the window halfway up to carry out this manipulation. Of course you have to be very careful when moving the glass. It is advisable to place it on a rather thick sheet.
  • Disassemble the window regulator entirely. It is essential to memorize your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held by screws or rivets, it is thus necessary to remove them.

The installation of an electric window regulator of a Toyota Picnic

  • Position the new window regulator. Make sure that its position is similar to the damaged window lifter. You probably need to use the bindings you have set aside.
  • Reposition the glass as you removed it. It will sometimes be necessary to rotate it a little so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals you removed.
  • Replace all of the door trim.

It's good, you now have a new and functional window regulator . So you have to turn on your car and test it.