The interest of an electric window regulator is significant compared to manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. In addition, it is not necessarily easy to determine precisely the source of the failure. Here we will see how to repair the electric window regulator of a Toyota Prius 4 Rechargeable . But before you start, you need to be sure you understand where the problem is. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple small repair can sometimes work. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you're sure what's causing the problem, let's get to the heart of the matter.
Replacing a Toyota Prius 4 Rechargeable window regulator: how to do it
Replacing a window regulator is rather time-consuming. Depending on your experience on the subject, count approximately three hours to make sure you don't get caught up in the time. Whether for a Toyota Prius 4 Rechargeable or on another car, this manipulation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. It is advisable to take a picture at different times to help you fit the new window regulator.
Removing a window regulator on a Toyota Prius 4 Rechargeable
- Remove the entire door trim. From the handle to the retro cover. This operation should be done rather gently using a flat screwdriver. You will have to make sure you have access to the window regulator at all points without being hampered. This step is the longest to perform.
- Remove the window regulator seals from your Toyota Prius 4 Rechargeable. Again, it is essential to do it delicately.
- Now that you have accessed the window regulator, remove the connectors. You can then release the window lifter motor if it is stuck.
- Remove all the clips that hold the glass in place, then release the glass. It is sometimes advisable to place the window halfway up to be able to carry out this operation. Of course you will have to be extremely careful when moving the window. It is preferable to place it on a sufficiently thick sheet.
- Disassemble the window regulator completely. It is essential to memorize your position well. You can take a picture of it if it can help you attach the new window regulator. The window regulator is sometimes held by screws or rivets, so they must be removed.
The installation of an electric window regulator of a Toyota Prius 4 Rechargeable
- Present the new window regulator. Make sure that its position is similar to the previous window regulator. You should definitely use the fasteners you removed.
- Replace the glass just as you removed it. At times it will be necessary to move it slightly so that it fits properly in its guide.
- Connect the connectors.
- Fit the seals that you have carefully removed.
- Replace all of the door trim.
It's done, you now have a new and functional window regulator . So you can put the ignition on and test it.