The advantage of an electric window regulator is undeniable compared to manual systems. However, it has the drawback of being much more restrictive in terms of repairs. Also, it is not necessarily easy to precisely determine the source of the problem. Here we will see how to replace the electric window of a Toyota Proace Verso . But before seeing what to do, you have to be sure you know where the problem came from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair can often work. Whether it's a false contact, or simply a lack of lubrication. Now that you've identified the source of the problem, let's get to the heart of the matter.change-window-Toyota-Proace-Verso

Toyota Proace Verso window regulator replacement: how to do it

Replacing a window regulator is quite time consuming. Depending on your experience in the field, plan approximately three hours in order to be sure to have the necessary time. Whether on a Toyota Proace Verso or on another vehicle, this manipulation is for experienced handymen. So let's see what to do, step by step. We recommend that you take pictures in several stages to help you reassemble the new window regulator.

Removing a window regulator on a Toyota Proace Verso

  • Remove all of the door trim. From the handle to the retro cover. This operation should be done fairly gently with a flat screwdriver. It will be necessary to make sure to have access to the window regulator at all points without being disturbed. This manipulation is the longest to perform.
  • Remove the window regulator gaskets from your Toyota Proace Verso. Again, it's important to go about it with care.
  • Now that you have access to the window regulator, remove the connectors. You must then remove the motor from the window regulator if it is ever blocked.
  • Release all of the fasteners that hold the window in place, then release the window. It is sometimes advisable to place the window halfway up to perform this operation. Of course, you will have to be very careful when handling the glass. It is advisable to put it on a rather thick sheet.
  • Remove the window regulator completely. It is important to remember your position. You can take a picture of it if it helps you fit the new window regulator. The window regulator is sometimes held in place by screws or rivets, so they must be removed.

Installation of an electric window on a Toyota Proace Verso

  • Fit the new window regulator. Make sure that its location is identical to the previous window regulator. You should definitely use the fasteners you have set aside.
  • Replace the glass the same way you removed it. It will sometimes be necessary to make it move a little so that it is placed correctly in its guide.
  • Connect the connectors.
  • Fit the seals you removed.
  • Refit all of the door trim.

That's it, you now have a new and working window regulator . So you need to turn on your car and test it.