The advantage of an electric window regulator is substantial compared to manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. In addition, it is not always easy to precisely determine the origin of the failure. With this article we will find out how to replace the electric window regulator of a Toyota Rav 4 . But before you start, you need to be sure you know where the fault is coming from. Let's be clear, sometimes it is unnecessary to replace the entire window regulator, a simple small repair can sometimes be enough. Whether it's an electrical short circuit, or just a lack of lubrication. Now that you're sure what the problem is, let's get back to our topic.
Toyota Rav 4 window regulator replacement: how to do it
Changing a window regulator is relatively time-consuming. Depending on your experience in the field, plan approximately two o'clock in order to be sure that you have the necessary time. Whether for a Toyota Rav 4 or on another car, this operation is for experienced handymen. So let's see how to do it, point by point. We recommend that you take a picture at different times to help you fit the new window regulator.
Removing a window regulator on a Toyota Rav 4
- Remove all of the door trim. From mirror cover to handle. This manipulation must be done relatively carefully using a flat screwdriver. Make sure to access the window regulator at all points without being disturbed. This step is the longest to perform.
- Remove the gaskets from the window regulator on your Toyota Rav 4. Again, it is essential to go about it with care.
- Now that you have accessed the window regulator, remove the connectors. You will then have to disengage the window lifter motor in case it is blocked.
- Remove all fasteners that hold the glass, then remove the glass. It is sometimes more advisable to position the window halfway up to perform this manipulation. Obviously we will have to be very careful when handling the glass. It is advisable to put it on a sufficiently thick sheet.
- Remove the window regulator completely. It is essential to memorize your position well. You can take a picture of it if it helps you attach the new window regulator. The window regulator is sometimes held by screws or rivets, so they must be removed.
The installation of an electric window of a Toyota Rav 4
- Present the new window regulator. Make sure that its location is similar to the previous window regulator. You may need to use the fasteners you removed.
- Reposition the glass just as you removed it. It will sometimes be necessary to move it slightly so that it fits properly in its guide.
- Reconnect the connectors.
- Fit the seals that you have carefully removed.
- Replace all of the door trim.
It's done, you now have a new and functional window regulator . So you will need to turn on your car and test it.