The interest of an electric window regulator is enormous in comparison with manual systems. However, it has the disadvantage of being much more restrictive in terms of repairs. In addition, it is not necessarily easy to pinpoint the source of the problem. With this article we will see How to repair the electric window of a Toyota Supra Mkii . But before you start, you have to be sure you know where the problem is coming from. Indeed, it is regularly unnecessary to change the entire window regulator, a simple small repair will sometimes suffice. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you're sure what the concern is, let's get to the heart of the matter.change-WINDOW-Toyota Supra Mkii

Toyota Supra Mkii window regulator replacement: how to do it

The replacement of a window regulator is quite long. Depending on your expertise in the field, plan approximately two o'clock to make sure you have the time you need. Whether for a Toyota Supra Mkii or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's look at what to do, point by point. We recommend that you take pictures at several stages to help you fit the new window regulator.

Removing a window regulator on a Toyota Supra Mkii

  • Remove the entire door trim. From mirror cover to handle. This operation should be done quite delicately with a flat screwdriver. Make sure to access the window regulator at all points without being hampered. This step is quite long to perform.
  • Remove the window regulator seals from your Toyota Supra Mkii. Once again, it is essential to do it delicately.
  • Now that you have accessed the window regulator, remove the connectors. You can then remove the motor from the window regulator if it is ever stuck.
  • Take out all the fasteners that hold the glass in place, then remove the glass. It is regularly better to position the window halfway up to perform this operation. Obviously you will have to be very careful when handling the glass. It is advisable to put it on a rather thick sheet.
  • Remove the window regulator completely. It is essential to remember your location well. You can take a picture of it if it helps you fit the new window regulator. The window regulator is regularly held by screws or rivets, they must therefore be removed.

The installation of an electric window of a Toyota Supra Mkii

  • Fit the new window regulator. Make sure that its location is similar to the previous window regulator. You will probably have to use the fasteners you have set aside.
  • Reposition the glass the same way you took it out. It will regularly be necessary to rotate it a little so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Replace all of the door trim.

It's good, you now have a new and functional window regulator . You can therefore switch on the ignition and test it.