The advantage of an electric window regulator is enormous in comparison with manual mechanisms. However, it has the defect of being much more complicated in terms of repairs. In addition, it is not necessarily easy to pinpoint the cause of the problem. In this article, we will see how to replace the electric window regulator of a Toyota Tercel . But before seeing the procedure to follow, you must be sure to understand where the dysfunction comes from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple small repair will sometimes work. Whether it's a false contact, or simply a lack of lubrication. Now that you are sure of the cause of the problem, let's get to the heart of the matter.window-changer-Toyota-Tercel

Replacing a Toyota Tercel window regulator: how to do it

Changing a window regulator is relatively time-consuming. Depending on your experience on the subject, count approximately two o'clock to make sure you don't get caught up in time. Whether it is a Toyota Tercel or another vehicle, this operation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take pictures at different times to help you mount the new window regulator.

Removing a window regulator on a Toyota Tercel

  • Remove the entire door trim. From the handle to the mirror cover. This should be done relatively carefully using a flat screwdriver. You must ensure that you access the window regulator at all points without being obstructed. This manipulation is quite long to execute.
  • Disassemble the window regulator seals from your Toyota Tercel. Again, it is crucial to do it delicately.
  • Now that you have accessed the window regulator, remove the connectors. You must then remove the motor from the window regulator when it is stuck.
  • Remove all the fasteners that hold the glass, then release it. It is sometimes advisable to position the window halfway up to carry out this manipulation. Of course, extreme care must be taken when handling the glass. It is advisable to place it on a rather thick sheet.
  • Disassemble the window regulator entirely. It is essential to memorize your location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held in place by screws or rivets, so they must be removed.

The installation of an electric window regulator of a Toyota Tercel

  • Present the new window regulator. Make sure its location is similar to the damaged window regulator. You should probably use the fixings you removed.
  • Replace the glass as you removed it. It will sometimes be necessary to rotate it a little so that it fits properly in its guide.
  • Reconnect the connectors.
  • Fit the seals that you have carefully removed.
  • Refit the entire door trim.

That's it, you now have a new and functional window regulator . You will need to turn on your car and test it.