The advantage of an electric window regulator is enormous in comparison with manual mechanisms. However, it has the disadvantage of being much more complicated in terms of repairs. In addition, it is not necessarily easy to pinpoint the cause of the failure. In this article, we will see how to replace the electric window regulator of a Toyota Tundra . But before you see what to do, you need to be sure you know where the problem is coming from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple small repair will sometimes suffice. Whether it concerns a false contact, or just a lack of lubrication. Now that you've identified the cause of the problem, let's get back to our topic.
Replacing a Toyota Tundra window regulator: how to do it
The replacement of a window regulator is relatively long. Depending on your expertise in the field, plan approximately two o'clock to make sure you don't get caught in the weather. Whether on a Toyota Tundra or another car, this manipulation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. It is advisable to take photos at different times to help you install the new window regulator.
Removing a window regulator on a Toyota Tundra
- Remove the entire door trim. From the mirror cover to the handle. This should be done relatively gently with a flat screwdriver. It will be necessary to ensure that you have access to the window regulator at any point without being disturbed. This manipulation is the longest to carry out.
- Disassemble the window regulator seals from your Toyota Tundra. Again, it is wiser to do it carefully.
- Now that you have accessed the window regulator, disconnect the connectors. You will then have to disengage the motor from the window regulator when it is stuck.
- Release all of the fasteners that hold the glass, then take it out. It is sometimes preferable to place the window halfway up to be able to carry out this operation. Of course, extreme care must be taken when handling the glass. It is advisable to place it on a rather thick sheet.
- Disassemble the window regulator entirely. It is wiser to memorize your location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is sometimes held in place by screws or rivets, so it will be necessary to remove them.
The installation of an electric window regulator of a Toyota Tundra
- Fit the new window regulator. Make sure that its position is similar to the damaged window lifter. You will probably have to use the fasteners you removed.
- Reposition the glass as you removed it. It will sometimes be necessary to move it a little so that it fits properly in its guide.
- Connect the connectors.
- Replace the seals you removed.
- Reassemble the door trim assembly.
That's it, you now have a new and functional window regulator . So you will need to turn on your car and test it.