The advantage of an electric window regulator is huge compared to manual window regulators. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to pinpoint the source of the failure. In this article we will see how to change the electric window of a Toyota Urban Cruiser . But before you can see what to do next, you need to be sure you understand where the problem is coming from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can often be sufficient. Whether it's a false contact, or simply a lack of lubrication. Now that you've identified the source of the problem, let's get back to our topic.window-regulator-Toyota-Urban-Cruiser

Toyota Urban Cruiser window regulator replacement: how to do it

Changing a window regulator is relatively tedious. Depending on your expertise in the field, plan approximately two o'clock to make sure you don't run out of time. Whether for a Toyota Urban Cruiser or on another vehicle, this manipulation is for experienced handymen. So let's see what to do, point by point. It is advisable to take a picture at different times to help you fit the new window regulator.

Removing a window regulator on a Toyota Urban Cruiser

  • Remove all of the door trim. From the handle to the retro cover. This manipulation must be done relatively carefully using a flat screwdriver. You must ensure that you have unimpeded access to the window regulator at all points. This step is the longest to perform.
  • Remove the window regulator seals from your Toyota Urban Cruiser. Again, it's important to go about it with care.
  • Now that you have accessed the window regulator, remove the connectors. You must then remove the window regulator motor if it is stuck.
  • Remove all the fasteners that hold the glass in place, then remove the glass. It is sometimes advisable to place the window halfway up to be able to perform this manipulation. Of course, you will have to be very careful when moving the window. It is preferable to place it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is important to remember your position. You can take a picture of it if it helps you fit the new window regulator. The window regulator is sometimes held by screws or rivets, so they must be removed.

The installation of an electric window of a Toyota Urban Cruiser

  • Present the new window regulator. Make sure that its position is identical to the damaged window regulator. You will probably need to use the fasteners you have set aside.
  • Reposition the glass just as you removed it. It will sometimes be necessary to rotate it slightly so that it fits correctly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Replace the entire door trim.

That's it, you now have a new and working window regulator . So you have to put the ignition on and test it.