The advantage of an electric window regulator is enormous compared to manual window regulators. However, it has the disadvantage of being much more complicated in terms of repairs. Also, it is not necessarily easy to determine precisely the source of the failure. Here we will see how to change the electric window regulator of a Toyota Verso . But before you start, you need to be sure you know where the failure came from. Let's be clear, it is sometimes unnecessary to change the entire window regulator, a simple small repair can sometimes work. Whether it concerns a false contact, or just a lack of lubrication. Now that you are sure of the source of the malfunction, let's get back to our topic.change-window-regulator-Toyota-Verso

Replacing a Toyota Verso window regulator: how to do it

The replacement of a window regulator is quite long. Depending on your expertise in the field, plan approximately two o'clock to make sure you don't get caught up in time. Whether for a Toyota Verso or another car, this repair is for experienced DIY enthusiasts. So let's take a look at what to do, step by step. We advise you to take pictures at several stages in order to help you mount the new window regulator.

Removing a window regulator on a Toyota Verso

  • Remove the entire door trim. From the handle to the mirror cover. This should be done very gently with a flat screwdriver. It will be necessary to ensure access to the window regulator at any point without being disturbed. This step is quite long to perform.
  • Remove the window regulator seals from your Toyota Verso. Again, it's important to do it delicately.
  • Now that you have access to the window regulator, disconnect the connectors. You must then release the window lifter motor in the event that the window is blocked.
  • Take out all the fasteners that hold the glass, then remove it. It is sometimes better to place the window halfway up to carry out this manipulation. Of course you have to be very careful when moving the glass. It is advisable to place it on a rather thick sheet.
  • Remove the window regulator as a whole. It is important to remember its location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is at times held in place by screws or rivets, so you must remove them.

The installation of an electric window regulator of a Toyota Verso

  • Fit the new window regulator. Make sure that its location is identical to the previous window regulator. You probably need to use the bindings you have set aside.
  • Replace the glass just as you removed it. At times it will be necessary to move it slightly so that it fits correctly in its guide.
  • Connect the connectors.
  • Replace the seals that you have carefully removed.
  • Reassemble the door trim assembly.

That's it, you now have a new and functional window regulator . So you have to put the ignition on and test it.