The advantage of an electric window regulator is undeniable compared to manual window regulators. However, it has the disadvantage of being much more complicated in terms of repairs. In addition, it is not always easy to pinpoint the source of the problem. Here we will see how to replace the electric window regulator of a Toyota Yaris 2 Ts . But before seeing the procedure to follow, you must be certain to understand where the dysfunction came from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can sometimes work. Whether it concerns an electrical short circuit, or just a lack of lubrication. Now that you are sure of the origin of the concern, let us return to our subject.change-window-regulator-Toyota-Yaris-2-Ts

Replacing a window regulator in Toyota Yaris 2 Ts: how to do it

Replacing a window regulator is rather time-consuming. Depending on your experience on the subject, plan about two o'clock to make sure you don't get caught up in time. Whether for a Toyota Yaris 2 Ts or another car, this operation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take pictures at several stages in order to help you mount the new window regulator.

Removing a window regulator on a Toyota Yaris 2 Ts

  • Remove all of the door trim. From the mirror cover to the handle. This should rather be done with care using a flat screwdriver. You will have to make sure to access the window regulator at any point without being embarrassed. This manipulation is quite long to perform.
  • Remove the window regulator seals from your Toyota Yaris 2 Ts. Again, it's important to be careful.
  • Now that you have access to the window regulator, disconnect the connectors. You must then release the window lifter motor if it is blocked.
  • Release all the fasteners that hold the window, then release it. It is sometimes advisable to position the window halfway up to carry out this manipulation. Obviously you have to be very careful when moving the glass. It is advisable to place it on a sufficiently thick sheet.
  • Remove the window regulator as a whole. It is important to remember your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held by screws or rivets, it will therefore be necessary to remove them.

The installation of an electric window regulator of a Toyota Yaris 2 Ts

  • Present the new window regulator. Make sure that its location is similar to the damaged window regulator. You will certainly need to use the fasteners you have removed.
  • Reposition the glass as you removed it. It will sometimes be necessary to move it a little so that it fits properly in its guide.
  • Reconnect the connectors.
  • Replace the seals you removed.
  • Replace all of the door trim.

It's good, you now have a new and functional window regulator . You will therefore have to switch on and test it.