The advantage of an electric window regulator is undeniable compared to manual window regulators. On the other hand, it has the defect of being much more restrictive in terms of repairs. Also, it is not necessarily easy to pinpoint the source of the failure. Here we will see how to replace the electric window regulator of a Toyota Yaris 3 Grmn . But before you start, you need to be sure you know where the failure came from. Let's be clear, it is sometimes unnecessary to change the entire window regulator, a simple small repair can often work. Whether it concerns an electrical short circuit, or simply a lack of oiling. Now that you've identified the root of the problem, let's get to the heart of the matter.change-window-regulator-Toyota-Yaris-3-Grmn

Replacing a window regulator in Toyota Yaris 3 Grmn: how to do it

Changing a window regulator is rather time-consuming. Depending on your expertise on the subject, plan approximately two o'clock to make sure you don't get caught up in time. Whether for a Toyota Yaris 3 Grmn or another car, this repair is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take pictures at several stages in order to help you mount the new window regulator.

Removing a window regulator on a Toyota Yaris 3 Grmn

  • Remove all of the door trim. From the mirror cover to the handle. This should rather be done with care with a flat screwdriver. You will have to make sure you have access to the window regulator at any point without being disturbed. This step is the longest to execute.
  • Disassemble the window regulator seals from your Toyota Yaris 3 Grmn. Again, it is essential to do this carefully.
  • Now that you have access to the window regulator, remove the connectors. You will then have to disengage the window lifter motor in case it is blocked.
  • Take out all of the fasteners that hold the glass, then release it. It is sometimes preferable to position the window halfway up to carry out this manipulation. Of course we will have to be very careful when moving the glass. It's best to put it on a rather thick sheet.
  • Disassemble the window regulator entirely. It is essential to remember your position. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held by screws or rivets, it is therefore necessary to remove them.

The installation of an electric window regulator of a Toyota Yaris 3 Grmn

  • Fit the new window regulator. Make sure that its location is similar to the damaged window lifter. You will probably have to use the fasteners that you have set aside.
  • Replace the glass just as you pulled it out. It will sometimes be necessary to move it a little so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals that you have carefully removed.
  • Replace all of the door trim.

That's it, you now have a new and working window regulator . You will therefore have to turn on your car and test it.