The advantage of an electric window regulator is enormous compared to manual mechanisms. On the other hand, it has the defect of being much more complicated in terms of repairs. In addition, it is not necessarily easy to identify precisely the nature of the problem. With this article we will see how to repair the electric window regulator of a Toyota Yaris 3 . But before seeing the procedure to follow, you must be certain of knowing where the dysfunction comes from. Indeed, it is sometimes unnecessary to change the entire window regulator, a simple repair will sometimes work. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you are sure of the nature of the concern, let's get to the heart of the matter.
How to replace a Toyota Yaris 3 window regulator
Changing a window regulator is quite tedious. Depending on your expertise on the subject, plan approximately two o'clock to make sure you have the time you need. Whether for a Toyota Yaris 3 or another car, this manipulation is for experienced DIY enthusiasts. So let's look at how to do it, step by step. We advise you to take pictures at different times to help you reassemble the new window regulator.
Removing a window regulator on a Toyota Yaris 3
- Dismantle the entire door trim. From the handle to the mirror cover. This should be done with enough caution using a flat screwdriver. You must ensure that you access the window regulator at all points without being obstructed. This manipulation is quite long to perform.
- Disassemble the window regulator seals from your Toyota Yaris 3. Again, it is essential to do it gently.
- Now that you have accessed the window regulator, disconnect the connectors. You must then remove the motor from the window regulator when it is blocked.
- Remove all of the clips that hold the glass, then remove the glass. It is sometimes advisable to position the window halfway up to carry out this manipulation. Of course you have to be very careful when moving the glass. It is advisable to place it on a sufficiently thick sheet.
- Disassemble the window regulator completely. It is essential to memorize your location. You can take a picture of it if it helps you to install the new window regulator. The window regulator is sometimes held in place by screws or rivets, so you must remove them.
The installation of an electric window regulator of a Toyota Yaris 3
- Position the new window regulator. Make sure that its location is similar to the previous window regulator. You will certainly have to use the fasteners that you have set aside.
- Replace the glass in the same way as you removed it. It will sometimes be necessary to move it slightly so that it fits properly in its guide.
- Reconnect the connectors.
- Replace the seals you removed.
- Replace all of the door trim.
It's good, you now have a new and working window regulator . So you need to turn on your car and test it.