The advantage of an electric window regulator is substantial in comparison with manual window regulators. On the other hand, it has the disadvantage of being much more complex in terms of repairs. In addition, it is not necessarily easy to pinpoint the origin of the problem. In this article, we will discover how to replace the electric window regulator of a Toyota Yaris Verso . But before seeing the procedure to follow, you must be certain to understand where the problem came from. Indeed, it is from time to time unnecessary to replace the entire window regulator, a simple repair can sometimes be enough. Whether it concerns a false contact, or simply a lack of lubrication. Now that you've identified the cause of the malfunction, let's go back to our topic.change-window-regulator-Toyota-Yaris-Verso

How to replace a Toyota Yaris Verso window regulator

The replacement of a window regulator is relatively long. Depending on your experience on the subject, count approximately two o'clock to make sure you don't get caught up in time. Whether for a Toyota Yaris Verso or another car, this manipulation is for experienced DIY enthusiasts. So let's look at how to do it, step by step. We advise you to take pictures at several stages to help you reassemble the new window regulator.

Removing a window regulator on a Toyota Yaris Verso

  • Remove the entire door trim. From the handle to the mirror cover. This should be done relatively carefully using a flat screwdriver. You must ensure that you have access to the window regulator at all points without being embarrassed. This step is quite long to perform.
  • Disassemble the window regulator seals from your Toyota Yaris Verso. Again, it is wiser to take it delicately.
  • Now that you have access to the window regulator, remove the connectors. You must then release the window lifter motor if it is ever stuck.
  • Release all the fasteners that hold the glass, then remove the glass. It is occasionally advisable to place the window halfway up to be able to carry out this manipulation. Of course, extreme care must be taken when moving the glass. It is best to put it on a sufficiently thick sheet.
  • Disassemble the window regulator entirely. It is wiser to remember your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held in place by screws or rivets, so they must be removed.

The installation of an electric window regulator of a Toyota Yaris Verso

  • Fit the new window regulator. Make sure that its location is similar to the previous window regulator. You probably need to use the fixings you removed.
  • Replace the glass just as you took it out. It will be necessary from time to time to make it move a little so that it fits correctly in its guide.
  • Connect the connectors.
  • Fit the seals that you have carefully removed.
  • Refit the entire door trim.

It's done, you now have a new and working window regulator . So you have to switch on and test it.