The interest of an electric window regulator is consequent compared to the manual mechanisms. However, it has the drawback of being much more restrictive in terms of repairs. In addition, it is not necessarily easy to precisely determine the source of the failure. Here we will see how to replace the electric window regulator of a Toyota Yaris . But before you start, you have to be sure you understand where the failure is coming from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple small repair can often be sufficient. Whether it's an electrical short circuit, or simply a lack of lubrication. Now that you've identified the source of the problem, let's get back to our topic.
Toyota Yaris window regulator replacement: how to do it
Changing a window regulator is quite time consuming. Depending on your expertise in the field, plan around three hours in order to be sure to have the necessary time. Whether on a Toyota Yaris or on another vehicle, this manipulation is for experienced DIY enthusiasts. So let's see what to do, point by point. We recommend that you take a photo at different times to help you reassemble the new window regulator.
Removing a window regulator on a Toyota Yaris
- Remove the entire door trim. From the handle to the retro cover. This manipulation must be done quite delicately using a flat screwdriver. You will have to make sure you can access the window regulator at all points without being hampered. This manipulation is the longest to perform.
- Remove the window regulator seals from your Toyota Yaris. Again, it is essential to do it delicately.
- Now that you have accessed the window regulator, disconnect the connectors. You must then release the motor of the window regulator when it is blocked.
- Release all the clips that hold the glass in place, then remove the glass. It is sometimes advisable to position the window halfway up to be able to perform this manipulation. Of course, you will have to be very careful when handling the glass. It is preferable to place it on a sufficiently thick sheet.
- Remove the window regulator entirely. It is essential to remember your location well. You can take a picture of it if it helps you fit the new window regulator. The window regulator is sometimes held by screws or rivets, so you have to remove them.
The installation of an electric window of a Toyota Yaris
- Position the new window regulator. Make sure that its location is similar to the previous window regulator. You will probably have to use the fasteners you removed.
- Replace the glass the same way you removed it. It will sometimes be necessary to rotate it a little so that it fits correctly in its guide.
- Reconnect the connectors.
- Replace the seals you removed.
- Replace all of the door trim.
It's done, you now have a new and functional window regulator . So you will need to turn on your car and test it.