The advantage of an electric window regulator is substantial compared to manual mechanisms. However, it has the disadvantage of being much more complicated in terms of repairs. In addition, it is not necessarily easy to precisely identify the origin of the failure. With this article we will see how to replace the electric window regulator of a Volkswagen 1200 . But before you start, you need to be sure you know where the problem is coming from. Indeed, it is sometimes unnecessary to replace the entire window regulator, a simple repair can often work. Whether it concerns an electrical short circuit, or only a lack of oiling. Now that you've identified the source of the dysfunction, let's get to the heart of the matter.change-window-regulator-Volkswagen-1200

Replacing a Volkswagen 1200 window regulator: how to do it

Changing a window regulator is quite time consuming. Depending on your experience on the subject, plan approximately three hours in order to be sure that you have the necessary time. Whether for a Volkswagen 1200 or on another car, this operation is for experienced DIY enthusiasts. So let's see how to do it, step by step. We advise you to take a picture at different times to help you reassemble the new window regulator.

Removing a window regulator on a Volkswagen 1200

  • Disassemble the entire door trim. From mirror cover to handle. This manipulation must be done carefully enough using a flat screwdriver. Make sure to access the window regulator at all points without being disturbed. This step is the longest to perform.
  • Remove the gaskets from the window regulator of your Volkswagen 1200. Once again, it is essential to do it with care.
  • Now that you have accessed the window regulator, disconnect the connectors. You must then release the window lifter motor if it is ever stuck.
  • Release all the fasteners that hold the glass in place, then remove the glass. It is sometimes advisable to place the window halfway up to be able to perform this manipulation. Of course, you will have to be very careful when moving the window. It is advisable to put it on a sufficiently thick sheet.
  • Remove the window regulator completely. It is essential to memorize your position well. You can take a picture of it if it helps you fit the new window regulator. The window regulator is sometimes held by screws or rivets, so you have to remove them.

The installation of an electric window regulator of a Volkswagen 1200

  • Fit the new window regulator. Make sure that its location is similar to the previous window regulator. You will certainly need to use the clips you removed.
  • Replace the glass in the same way as you took it out. It will sometimes be necessary to move it a little so that it fits correctly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Replace all of the door trim.

It's good, you now have a new and functional window regulator . So you have to put the ignition on and test it.