The advantage of an electric window regulator is undeniable in comparison with manual window regulators. However, it has the drawback of being much more complex in terms of repairs. Also, it is not always easy to pinpoint the source of the problem. With this article we will see how to repair the electric window of a Volkswagen Golf 6 R . But before seeing what to do next, you have to be sure you understand where the problem comes from. Indeed, it is sometimes useless to replace the entire window regulator, a simple repair will sometimes work. Whether it concerns a false contact, or only a lack of oiling. Now that you're sure where the concern is, let's get to the heart of the matter.change-window-regulator-Volkswagen-Golf-6-R

How to replace a Volkswagen Golf 6 R window regulator: how to do it

The change of a window regulator is rather long. Depending on your experience in the field, count approximately two o'clock in order to be sure to have the necessary time. Whether on a Volkswagen Golf 6 R or on another car, this manipulation is for experienced handymen. So let's look at what to do, point by point. We advise you to take a picture in several steps to help you reassemble the new window regulator.

Removing a window regulator on a Volkswagen Golf 6 R

  • Remove all of the door trim. From mirror cover to handle. This manipulation should be done rather delicately using a flat screwdriver. You must ensure that you can access the window regulator at all points without being obstructed. This manipulation is quite long to perform.
  • Remove the gaskets from the window regulator on your Volkswagen Golf 6 R. Once again, it is essential to do it carefully.
  • Now that you have access to the window regulator, disconnect the connectors. You must then disengage the window regulator motor if it is blocked.
  • Release all of the clips that hold the glass in place, then release the glass. It is sometimes preferable to place the window halfway up to be able to carry out this manipulation. Of course, we will have to be very careful when handling the glass. It is advisable to place it on a rather thick sheet.
  • Remove the window regulator completely. It is essential to retain your position. You can take a picture of it if it helps you fit the new window regulator. The window regulator is sometimes held by screws or rivets, it will therefore be necessary to remove them.

Installing an electric window regulator on a Volkswagen Golf 6 R

  • Position the new window regulator. Make sure that its position is identical to the previous window regulator. You will probably need to use the fasteners you removed.
  • Replace the glass as you took it out. It will sometimes be necessary to make it move slightly so that it fits properly in its guide.
  • Connect the connectors.
  • Replace the seals you removed.
  • Refit all of the door trim.

It's done, you now have a new and working window regulator . You must therefore turn on your car and test it.