The advantage of an electric window regulator is enormous compared to manual systems. However, it has the disadvantage of being much more complex in terms of repairs. In addition, it is not always easy to pinpoint the source of the fault. In this article we will see how to change the electric window regulator of a Volkswagen Golf 6 . But before seeing the procedure to follow, you must be certain to understand where the failure comes from. Indeed, it is regularly useless to replace the whole window regulator, a simple repair can sometimes work. Whether it concerns a false contact, or simply a lack of lubrication. Now that you're sure of the source of the concern, let's get to the heart of the matter.
Replacing a window regulator in Volkswagen Golf 6: how to do it
The replacement of a window regulator is rather long. Depending on your expertise on the subject, count about two o'clock to make sure you have the time you need. Whether it's for a Volkswagen Golf 6 or another car, this operation is for experienced DIY enthusiasts. So let's see what to do, step by step. We advise you to take photos at different times to help you reassemble the new window regulator.
Removing a window regulator on a Volkswagen Golf 6
- Remove the entire door trim. From the handle to the mirror cover. This should be done rather gently with a flat screwdriver. It will be necessary to ensure access to the window regulator at any point without being disturbed. This step is quite long to perform.
- Remove the window regulator seals from your Volkswagen Golf 6. Again, it's wiser to do it gently.
- Now that you have accessed the window regulator, disconnect the connectors. You must then remove the motor from the window regulator if it is stuck.
- Take out all the clips that hold the glass, then take it out. It is regularly preferable to place the window halfway up to carry out this manipulation. Obviously we will have to be very careful when moving the glass. It is best to put it on a rather thick sheet.
- Remove the window regulator as a whole. It is wiser to remember your position. You can take a picture of it if it helps you fix the new window regulator. The window regulator is regularly held by screws or rivets, so you must remove them.
The installation of an electric window regulator of a Volkswagen Golf 6
- Position the new window regulator. Make sure that its location is similar to the previous window regulator. You will probably have to use the clips you removed.
- Reposition the glass as you removed it. It will be regularly necessary to move it a little so that it fits properly in its guide.
- Reconnect the connectors.
- Fit the seals that you have carefully removed.
- Refit the entire door trim.
It's done, you now have a new and functional window regulator . So you have to put the ignition on and test it.