The advantage of an electric window regulator is considerable compared to manual systems. However, it has the disadvantage of being much more complicated in terms of repairs. In addition, it is not always easy to pinpoint the source of the problem. In this article we will see how to replace the electric window regulator of a Volkswagen Golf 7 . But before you start, you need to be sure you know where the problem is coming from. Indeed, it is from time to time unnecessary to replace the entire window regulator, a simple repair will often work. Whether it concerns a false contact, or simply a lack of oil. Now that you've identified the cause of the problem, let's get to the heart of the matter.change-window-regulator-Volkswagen-Golf-7

Replacing a window regulator in Volkswagen Golf 7: how to do it

Replacing a window regulator is relatively tedious. Depending on your experience on the subject, count about two o'clock to make sure you have the time. Whether for a Volkswagen Golf 7 or another car, this manipulation is for experienced DIY enthusiasts. So let's take a look at how to do it, step by step. We advise you to take photos at different times to help you reassemble the new window regulator.

Removing a window regulator on a Volkswagen Golf 7

  • Remove all of the door trim. From the handle to the mirror cover. This should be done relatively carefully using a flat screwdriver. It will be necessary to ensure access to the window regulator at any point without being obstructed. This step is the longest to perform.
  • Remove the window regulator seals from your Volkswagen Golf 7. Again, it's wiser to do so with caution.
  • Now that you have access to the window regulator, remove the connectors. You will then need to disengage the window lifter motor when it is stuck.
  • Release all the fasteners that hold the glass, then remove it. It is occasionally advisable to position the window halfway up to carry out this operation. Obviously you have to be very careful when moving the glass. It is best to place it on a sufficiently thick sheet.
  • Remove the window regulator entirely. It is wiser to memorize your location. You can take a picture of it if it helps you fix the new window regulator. The window regulator is occasionally held in place by screws or rivets, so you will need to remove them.

The installation of an electric window regulator of a Volkswagen Golf 7

  • Introduce the new window regulator. Make sure its location is similar to the damaged window regulator. You should probably use the fixings that you removed.
  • Replace the glass in the same way as you took it out. It will be necessary from time to time to make it move slightly so that it fits properly in its guide.
  • Reconnect the connectors.
  • Fit the seals you removed.
  • Replace all of the door trim.

It's done, you now have a new and functional window regulator . You will therefore have to switch on and test it.